en-USsk-SK

KINEMATICA MICCRA GmbH

Rotor / Stator Homogenizers

Kinematica’s batch and inline homogenizers / dispersers achieve fully reproducible results for emulsions, dispersions or cell disruption from lab- and pilot-scale to full-scale production. The homogenizers provide the desired mean particle size and uniform distribution according to the user’s requirements. The field of application is wide and includes dairy, food, cosmetic, chemical, pharmaceutical and biotech.

Kinematica invented the Rotor – Stator principle which is widely used in homogenizing systems. Have a look how it works here.


KINEMATICA
POLYTRON® laboratory line
Volumes: from 0.01 to 30'000 ml
Stator diameter: from 3 to 60 mm
Speed range: up to 30'000 rpm
Smooth start function, autoclavable dispersing aggregates

The POLYTRON® line systems produce fine dispersion, emulsion and homogenization, offering efficient disruption of the systems, reproducibility of the results and simple procedures.
Thanks to the broad range of dispersing aggregates, the POLYTRON systems are suitable for various laboratory application, including disruption of animal and human tissues, sample preparation for RNA and DNA extraction, disruption of fruits and vegetables samples, sample preparation in the waste water industry, pills disruption for content analysis in the pharma industry as well as making emulsions from oil and water. Various models are available.

Test POLYTRON® PT 3100D (volume 0.1ml - 10'000ml) in your lab! More information

KINEMATICA
MEGATRON® laboratory line
Throughput: up to approx. 11 l per min
Pressure: up to 6 bar (higher pressures possible on request)
Temperature: up to 90 °C
Speed range: up to 30 000 rpm (autoclavable version up to 18 000 rpm)

When testing and optimizing formulas, high process safety is paramount. The MT3100 S2 enables processing of complex material systems with minimal loss of mass and minimal energy, leading to efficient and replicable results.

This system allows realizing your ideas under as realistic conditions as possible in small, economic quantities. During the subsequent scale-up process, the results can be replicated with larger Kinematica machines.

Depending on the material’s system, the components bind into the finest emulsions or suspensions with droplet or particle sizes down to a few microns. These results are achieved by the machine’s high speed and the resulting peripheral tip speeds as well as precise rotor / stator geometry. More information

KINEMATICA
MEGATRON® pilot plant line

Kinematica’s MEGATRON® inline pilot plant systems enable processing of complex material systems with minimal loss of mass and minimal energy, allowing for efficient and replicable results. During the subsequent scale-up process, the results can be replicated with larger Kinematica machines. Applications are mainly in recirculation mode. More information

KINEMATICA
POLYTRON® pilot plant and production line
Batch size: from 30 to 40’000 ml
Stator diameter: up to 350 mm
Speed range: up to 24'000 rpm

Kinematica’s POLYTRON® batch series for pilot plant and production is ideal for applications up to 40 resp. 50 liters and for scale ups from research and development to pilot plant or small production scale processes. These units offer high versatility in the size and numbers of aggregates to be used, for laboratory as well as for pilot plant and small production applications. This permits the direct comparison of results between the smaller and larger aggregates, facilitating the scale up decision.

Available models:
POLYTRON PT 45-80 GT sample amount 0,1 – 30 000 ml
POLYTRON PT 6100D sample amount 0,1 – 30 000 ml
POLYTRON PT 7100 sample amount 200 ml – 40 000 ml
POLYTRON PT-D 36-60 sample amount 0.10 ml – 50 000 ml More information

KINEMATICA
MEGATRON® LINE
• 1- / 2- or 3-stage machines available
• single or double mechanical seal
• different available dispersing generators for coarse up to finest results
• throughputs from 12 l/min up to 150‘000 l/h
• pressure up to 6 bar standard (higher pressures possible on request)
• temperature up to 90 °C standard (higher temperatures possible on request)
• high-quality energy efficient drive systems with optional speed controller
• different surface qualities available
• explosion-proof design

The MEGATRON® LINE systems produce fine dispersion, emulsion and homogenisation in flow and are suitable for various applications including making of emulsion, juices and smoothies production, ice-cream production (with foaming machines), making of creams in cosmetics and pharmaceutical industry and many others. More information

MICCRA GmbH
Volumes: 0.1 ml - 50 liters
Stator diameter: 5 - 40 mm
Tool length: 115 - 420 mm
Speed range: 8'800 - 39'000 rpm
Power output: 145 - 900 Watt

The MICCRA homogenizers / dispersers are very powerful and allow for high speed (up to 39'000 rpm), keeping a constant speed even with increasing viscosities. They are available in hand held or stand mounted configurations and suitable for a wide range of laboratory applications including agrarian technology, cell biology, food and biotechnology. Following models are available: MICCRA D-1, D-9 and D-15. More information

MICCRA GmbH
Speed range: 3'000 - 36'000 rpm
Power output: max. 2'700 Watt
Max. pressure: 20 bar
Max. vacuum: 1 mbar
Flow rate acc. to water: up to 45 l/min.

The MICCRA D-27 InLine homogenizing drive with integrated water cooling circuit is equipped with a powerful stainless steel three-phase asynchronous motor which delivers product results up to nanoscale at a low noise level (63 dB(A)). The unique cartridge sealing system (in connection with the DFK-flow chamber) is suitable for pressure and vacuum applications in laboratories or pilot plants. More information

MICCRA GmbH
Pilot plant dispersers and mixers are available for batch as well as for inline applications.

MICCRA pi Batch
Max. batch size: 2’000 liters
Max. viscosity: 8’000 mPas
Max. process temperature: 160 °C
Rotor rotational speed: 6’000 rpm
Power output: max. 13'000 Watt
Tool-length: 750 – 1200 mm

MICCRA pi InLine
Max. flow rate: 40’000 l/h
Max. viscosity: 8’000 mPas
Max. process temperature: 160 °C
Rotor rotational speed: 8’000 rpm
Cleaning and sterilization by CIP / SIP units More information

MICCRA GmbH
The InLine MICCRApro Series is based on the flowthrough-principle and constructed on a mobile stainless steel base frame. The product can be dispersed, homogenized, or pumped through the dispersing apparatus, by an external circulation line.

Key advantages:
- Up to 2 different stator sizes (ø100, ø120) and several different rotor designs either for fibrous and solid particles as well as rotors for very fine emulsions.
- CIP- and SIP units available.
- Powerful asynchronous Motors with water cooling.
- Double acting mechanical seals in accordance with pharmaceutical standards.
- Highly customizable homogenizing system. More information